The Power Commander V Power Commander V Product Introduction The New Power Commander V is loaded with tons of new features. Below you will find some Power Commander V features. Reduced size from PCIIIusb (less than half of the size of PCIII)USB powered from computer (9 volt adapter is no longer needed for programming) 2 position map switching function built in (map switch not included) Gear input (allows for map adjustment based on gear and speed)Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature) With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables). Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes 10 throttle position columns (up from 9 on PCIIIusb) Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)Fits Outlander 800 & 10002012,2013,2014
You just got back from a ride and you heard a quad that sounded like a friggin' HARLEY! And he had all the power in the world. Now, you want in on the secret?HMF Exhaust Systems are the most popular aftermarket pipes on the market. When you HEAR an ATV go by and it really gets your attention, chances are, there's an HMF under the fender. Loaded with power, the HMF is ideal for competitive racing and can be modified to ride in any condition. HMF Exhaust Systems even meet the USFS criteria for national forest and public land us. The exclusive two-piece billet end-cap allows for on-the-fly insertion of their Quiet-Core and USFS approved spark arrester. HMFs are designed with larger diameter stepped head pipes and a 2" open-flow non-restrictive core to produce MAXIMUM HORSEPOWER and TORQUE throughout the entire power-band. The HMF Utility Series is packed with Silent Sport brand ceramic pillow packaging which gives HMF mufflers that distinct, deep, rich tone and carries a five-year warranty.Each HMF Utility Series Exhaust System is hand-crafter using 304 stainless steel headers, inlets, and rivets, mild steel cores, solid construction T6061 aluminum canisters and brackets. All of which are perfectly fit to make the highest quality, high performance ATV exhaust systems on the market today. In other words...THESE HMF PIPES ARE THE BOMB!!!APPLICATIONS:Can-Am/BRP Outlander 500/650/800 (06-08)**ROUND BRUSHED ALUMINUM CANISTER. SLIP-ON WITH "SPRING MOUNTS"**NOTE: DOES NOT WORK ON ANY 2 PASSENGER VERSIONS SUCH AS THE CAN-AM/BRP 800 OUTLANDER MAX OR 800 OUTLANDER MAX XT!* REQUIRES AN EFI PROGRAMMER.* HMF SAYS THIS ATV REQUIRES AN EFI PROGRAMMER WHEN USING THIS EXHAUST. WITHOUT THE PROGRAMMER THE ATV WILL RUN TOO LEAN AND MAY CAUSE ENGINE DAMAGE.* HMF CLAIMS THE PIPE AND EFI PROGRAMMER COMBINATION YIELDS A 5-5 1/2 HORSEPOWER GAIN.Please select whether your bike has a spring or clamp mount
REAL VALUE. REAL COLD. One-piece, roto-molded construction for extreme toughness and durability.Constructed of food-grade material that is UV resistant and DryIce compatible.K2’s SNOWblown™ insulation is injected under extreme pressure, ensuring you get proper insulation for maximum ice retention.The K2 ICEvault™ gasket is designed and installed to lock in the cold and keep the heat out. Partnered with the LOCKaway™ lid design your K2 will keep your contents ice cold or steaming hot as well as protect them from the outside elements.The Summit 20 features a nylon strap with a cushioned shoulder piece making its portability truely grab-n-go!The POSITRAC™ lid latches are designed to create a positive seal and are mounted on molded-in keepers for that perfect closure every time.The ENDURA™ hinge system is a full length integrated hinge that is designed to keep your lid permanently attached.Our SUREgrip™ rubber feet are non-marking and designed to keep your cooler exactly where you put it. You can add SMOOTHglide™ covers to them which will allow the cooler to slide easily.The bottom line is no matter your activity, hunting, fishing, boating, camping, rafting, tailgating or just enjoying a day at the beach or a backyard barbeque — you won’t be disappointed by the ice retention or reliability of your K2 cooler
The '06-Up Can Am 650/800 is factory equipped with a 650cc or 800cc four stroke engine. They came equipped with 26" tires, 8.0" of front and 9.0" of rear suspension travel also 12.0" of ground clearance. Xtreme's 1.5" Front Leveling kit creates room for up to 30.0" tires. That combination provides approximately 3.5" (2" tires + 1.5" lift kit) of front lift height and 2.0" of rear lift. This gives a total 15.0 ground clearance. Get the most out of your Can Am with the Xtreme 1.5" lift today. (Relocates top of Front shock/springs).Xtreme's lift systems were designed to provide maximum performance, durability, and enhance handling and stability characteristics while making installation simple and easy. Our design helps stabilize the suspension and makes your ATV more sure footed over rough terrain. Xtreme lifts provide the maximum lift available without causing costly damage to axles and related drive train components. Trail friendly lift systems built to get you in and OUT of the deep stuff.All Xtreme lift systems are precision engineered using 3/16 or 1/4 inch cold roll steel for maximum strength and reliability. Parts are laser cut then manufactured to exacting tolerances to provide the best value available. All Xtreme products are backed by a Limited Lifetime Warranty.Demand the best and Go XTREME!Increase Ground Clearance Run Larger Tires Improve Handling Quick and Easy Installation Limited Lifetime WarrantyGO DEEPER, HARDER, FARTHER & FASTERWITH XTREME!